Figure 6
Figure 7
Track assembly
6
HANDICARE 2000 SIMPLICITY / STYLE INSTALLATION MANUAL
Installing the stanchions/track
Note:
Hand ratchet the bolts – do not use
power tools.
Stanchion lock bolt
M10 x 50
socket cap
head screw
45Nm
Stanchion/rail bolt
M10 x 55
button head
screw
15Nm
Rail Joint bolt
M8 x 55
25Nm
Rail bolts at the end
of the track – x 2
(with plastic cap)
M10 x 55
button head
screws
10Nm
First section
1
Set the furthest bottom stanchion at the
correct height. (Example:- Stanchion 16 –
Type A – Setting height = 74mm
2
Set the last section before the first joint to the
correct height
(Figure 6)
. Tighten the lock
bolt to 45Nm
(Figure 7)
.
3
Attach the top rail on to the two stanchions.
Use stanchion/rail bolts supplied
(Figure 8)
.
Note:
See note for specified torques.
4
Attach the bottom rail.
5
Fasten the feet down to provide additional
stability for the rest of track.
Second section
1
Set the next stanchion at the correct height
ready for the second section of rail. This
needs to be placed just before the joint.
2
Add the next sections of rail. Top section
first and then the bottom section. Use a
podger spanner tool to help ease the two
sections of rail together
(Figure 9)
.
3
Set the next stanchion at the correct
height two down from the previous one
nearest the joint.
