Figure 51
Figure 52
Figure 50
18
HANDICARE 2000 SIMPLICITY / STYLE INSTALLATION MANUAL
Fitting the 2000 Simplicity seat (manual)
Fitting the 2000 Simplicity
seat (manual)
Items required:
Tools required:
• Seat
• 13mm Socket
• 4mm Allen key
• No. 2 Pozi-drive
Note: For powered seat – see pages 28-33.
1
Remove seat from the seat box.
2
Remove power pack carry handle
(Figure 50)
and fasten the seat post to the correct height
(Torque 33Nm)
(Figure 51)
.
3
Lay the seat on its back on the floor and
remove the seat base bolt and washer
(Figure 52)
.
4
Lift the seat and position it on to the seat
stem
(Figure 53)
.
Note:
Be careful not to knock the swivel safety
switch when lowering the seat onto the stem
(Figure 54)
.
5
Gently rotate the seat backwards and
forwards until the swivel locking peg locates.
6
Fully swivel the seat using the swivel levers.
7
Refit the seat base bolt and washer that you
removed in step 3
(Figure 55)
.
8
Swivel the seat back to the drive position
using the swivel levers.
9
Remove the drive toggle and link cables and
make the seat cable connections by feeding
through the seat stem/post
(Figure 56)
.
Note:
Ensure that no cables are pinched or
trapped when fitting the power pack front cover.
