handi quilter HQ STITCH 510 Instruction Book Download Page 22 | Manualshive

Page: 22 / 22

background image

40

See page 20
See page 20
See page 26
See page 26

See page 24
See page 26

See page 18
See page 36
Replace the bobbin.

See page 26
See page 26
See page 26

See page 26

See page 26

See page 26
See page 20
Change the needle

See page 28
See page 20
See page 26
Make the stitch shorter

See page 36
Make the stitch longer

See page 28
See page 26

See page 8
See page 26
See page 12
See page 36
See page 36
See page 36

1. The needle thread is not threaded properly.
2. The needle thread tension is too tight.
3. The needle is bent or blunt.
4. The needle is incorrectly inserted.
5. The needle thread and the bobbin thread are not set under the

presser foot when starting sewing.

6. The thread is either too heavy or too fine for the needle.

1. The bobbin thread is not threaded properly in the bobbin holder.
2. Lint has collected in the hook race.
3. The bobbin is damaged and doesn't turn smoothly.

1. The needle is incorrectly inserted.
2. The needle clamp screw is loose.
3. The needle is too fine for the fabric being used.

1. The needle is incorrectly inserted, bent or blunt.
2. The needle and/or fabrics are not suitable for the work being

sewn.

3. A Blue Tip needle is not used when sewing stretch, very fine

fabrics and synthetics.

4. The needle thread is not threaded properly.
5. A poor quality needle is being used.

1. The needle thread tension is too tight.
2. The needle thread is not threaded properly.
3. The needle is too heavy for the fabric being sewn.
4. The stitch length is too long for the fabric.

1. The feed dog is packed with lint.
2. The stitches are too fine.

1. The needle thread tension is too loose.
2. The needle is either too heavy or too fine for the thread.

1. The machine is not plugged in.
2. Thread has been caught in the hook race.
3. The presser foot is raised.
1. Thread has been caught in the hook race.
2. Lint has built up in the hook race or bobbin holder.
3. The machine needs oiling.

Troubleshooting

Condition

The needle thread
breaks.

The bobbin thread
breaks.

The needle breaks.

Skipped stitches

Seam puckering

The cloth is not
feeding smoothly.

Stitches form loops

below the fabric.

The machine does not
work.

The machine does not

run smoothly and is
noisy.

Reference

Cause

«
...
20
21
22

Summary of Contents for HQ STITCH 510























Reviews:

No comments

Related manuals for HQ STITCH 510

MICRO-IMAGECHECKER A200 Series

Brand: Panasonic Pages: 102

Brand: Baby Lock Pages: 76

Admiral 10080010

Brand: Windsor Pages: 37

Brand: Singer Pages: 56

Minoltafax 1400

Brand: Konica Minolta Pages: 157

Brand: GBC Pages: 2

Brand: Singer Pages: 42

HORIZON Memory Craft 9480 QC PROFESSIONAL

Brand: Janome Pages: 164

Adgressor BR 1050CS

Brand: Nilfisk-Advance Pages: 82

AquaRide BRX 700

Brand: Nilfisk-Advance Pages: 82

Brand: SCIFIT Pages: 104

Brand: JUKI Pages: 32

Brand: JUKI Pages: 15

Brand: JUKI Pages: 2

Brand: JUKI Pages: 88

Brand: JUKI Pages: 36

Brand: JUKI Pages: 12

Brand: JUKI Pages: 31

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands