HandHeld Nautiz X8, Manual

Page: 10 / 40

10
3.2 Charge the Batteries
The Terminal ships with the battery only slightly charged. Charge the battery with the charging cable for a
minimum of 4 or 6 hours before initial use .
1. Attach the appropriate plug adapter to the plug of the power cable.
2. Insert the plug into the appropriate power source.
3. Plug the power cable into the USB Jack on the side end of the Terminal.
WARNING: Use only Handheld-approved peripherals, power cables, and power adapters. Unauthorized peripherals,
cables, or power adapters may cause batteries to explode or damage your device.
DO NOT attempt to charge damp/wet terminals or batteries. All components must be dry before connecting to an
external power source.
Batteries must be charged at a temperature ranging from 0~45
℃
(±3
℃
) or the life of the battery may be shortened.
CAUTION: After the battery has been charged, disconnect the DC Power Jack from the terminal. If you stay on that
plug in use, it is possible to break the power code.
NOTE: The rechargeable battery pack is not initially charged. Charge the battery before using.
NOTE: If you remove the battery pack or it completely discharges, you have 30 minutes to insert a charged battery pack
before the battery completely discharges.
3.3 LED Indicators
The red LED is ON while charging the battery and the green LED is ON when the battery is fully charged.