23
1
2
CHANGING THE MAIN BATTERY PACK
Before changing the battery pack, press the Power key to put the terminal in Suspend Mode so that
operations are suspended before removing the main power source. ALWAYS put the terminal in Suspend
Mode prior to changing the battery.
1. Loosen the handstrap.
2.
Remove the battery compartment door by moving the battery door lock to the left and lifting up the
door through the slots on the sides.
3.
Remove the battery by pulling down the battery pack retainer and lifting the battery out. Replace the
new battery into the battery well with the battery connectors facing the top.
4.
Replace the battery door inserting the bottom first and then push the top of the door until the lock
secures the door.
NOTE: The battery door must be installed prior to booting the unit.
CHARGING OPTIONS
When the battery is installed in the Terminal, you can charge it using the AC Power Supply shipped with this
unit.
CHARGING TIME
The Li-ion battery pack requires five hours to charge to full capacity.
Slots on the sides
Battery Pack Retainer
Battery door lock
Summary of Contents for Nautiz X8
Page 1: ...NAUTIZ X8 MANUAL ...
