HandHeld ALGIZ 10XB, Manual

Page: 38 / 41

Algiz 10XB Manual
38
handheld
Use only detergents or cleaners intended for computers.
Connectors
1. Remove the battery
2. Soak the end of a swab with isopropyl alcohol and rub across the connector pins.
3. Be careful not to leave any residue on the connectors.
4. This process should be repeated approximately three times.
Note: If isopropyl alcohol is not available, use computer cleaning detergent or a pencil eraser
(rubber), taking care not to leave any foreign bodies on the pins.
Copyright Notice
Copyright © 2010 Handheld Group AB, ALL RIGHTS RESERVED. No part of this document may be
reproduced, copied, translated or transmitted in any form or by any means, electronic or mechanical,
for any purpose, without the prior written permission of the original manufacturer.
Trademark Acknowledgement
Brand and product names are trademarks or registered trademarks of their respective owners.
Disclaimer
Handheld Group AB reserves the right to make any product changes without notice, including to
circuits and/or software described or contained in this manual, in order to improve design and/or
performance. Handheld Group AB assumes no responsibility or liability for the use of the described
product(s), conveys no license or title under any patent, copyright, or mask works rights to these
products and makes no representations or warranties that these products are free from patent,
copyright, or mask works rights infringement, unless otherwise specified. Applications described in
this manual are for illustration purposes only. Handheld Group AB makes no representation or
warranty that such applications will be suitable for the specified use without further testing or
modification.
Customer Service