CS-652 operation manual
issue 2 14.01.17
P.12 of 14
>
Machine Setting (Cont.)
>>
Temperature Setting Adjustment
Press the #3 (SET) once, the display will alike the below diagram. PV will show with “SH” and SV
will show the preset temperature setting. You can press the OUT1 ”
“ to decrease or OUT2 “
“ to increase the temperature setting. This machine is using degree C Celsius, the maximum setting
is 400 C (we recommend the temperature setting below 260 C as a higher temperature will
decrease the life span of the machine).
>>
Press Timer Adjustment
Press the #3 (SET) once again, the display will alike the below diagram. PV will show with “St” and
SV will show the preset press time setting. You can press the OUT1 ”
“ to decrease or OUT2 “
“ to increase the time setting. This machine is using second as the counting unit, the maximum
setting is 999 seconds.
Press the #3 (SET) again, it will back to normal display mode.
>>
Press Pressure Adjustment
A.
Turning the knob on the compress air filter regulator to adjust the press pressure.
B.
Turning the press pressure adjusting knot for the cylinder
to adjust the press pressure.
C.
By adjusting the four adjustment screws below the working table, the pressure of the press
can also be changed, even under the same air pressure setting.
