CS-652 operation manual
issue 2 14.01.17
P.10 of 14
>
Machine Operation
1.
After connected the main power supply, adjust the heating temperature and time, press pressure,
and planning the machine operation method (push buttons/pedal). Then turn on the heater power,
the temperature of the heating plate will go up gradually.
2.
Wait until the heating plate reaches the preset temperature. Place the cloth on the working table
and step on the left foot switch once or press the start buttons at the front, the heating plate will
goes down. The timer will be triggered simultaneously. After the countdown finished, the heating
plate will go up. The press cycle is completed.
3.
If you step on the right foot switch once in the duration of countdown or press the cancel button at
the front, the timer will stop immediately and the heating plate will go up, the press cycle will be
terminated.
4.
While the machine is working, the heating plate will go up automatically once the safety bar is
triggered.
5.
Switch off the main power after all the works are finished.
.
