CS-652 operation manual
issue 2 14.01.17
P.9 of 14
>
Preparation Before Main Power Connected
1.
Compress air connection
Since the heating plate will go up after compress air connected, the cable ties on the heating
plate and the working table should be removed first.
2.
Main power connection
The main power cable with plug is located at the back of the machine, plug into the main power
supply socket.
3.
Foot switch connection
The foot switch socket is located at the back of the machine, plug in the foot switch connector
and tighten the screws.
>
Operation Mode Selection
The machine has two operation modes:
A.
Manual Push Button Mode – Press both the left & right start buttons at the front, the heating
plate goes down, the timer starts to countdown. Once the timer is up or when you press the
cancel button at the middle, the heating plate goes up.
B.
Pedal Control Mode – Step on the left foot switch, the heating plate goes down, after move
away the foot, the timer starts to countdown. When the countdown is completed or you step
into the right pedal, the heating plate goes up.
Pedal Switch
1
2
