AI-007 operation manual
Issue 1 12.10.10, HMI version 13, plc version 29
P.28 of 43
>
Basic Operation (cont.)
>>
Tape Loading (cont.)
When inserting the tape thru the cutter area, it is best to place the nozzle in the park position. At
this time, the tape clamp will be released to facilitate the tape insertion.
Go to page ‘main’ and press the nozzle parking button.
When parked, the nozzle is moved to a position farther away from the operator. This gives a cleaner
look at the cutter opening for a more convenient tape loading. This is also safer as the chance of
getting burn by the nozzle is minimized.
Tape installation in the cutter area
After loading, press the park button again to bring the nozzle back to standby position. Press the
right foot pedal to jog the rollers and make sure the tape is running at the center of the rollers
smoothly. Adjust the side guides to shift tape if needed.
Press to park or un-park the nozzle
Adjust side guides to center tape
Seam tape
