AI-007 operation manual
Issue 1 12.10.10, HMI version 13, plc version 29
P.22 of 43
> Start Up and Shut Down Procedures (cont.)
>> Start up Procedures
1
Turn on the machine by pressing the green power ON button
2
Switch on the compressed air by turning the main air ON/OFF switch knob
3
Enable the heating by pressing the HEAT button.
The machine display will indicate various information including company contact information and
software versions of the machine. After about 20 seconds, the page ‘main’ is displayed meaning the
machine is ready for operation. While the software version page is displayed, you can choose the
preferred language.
The display will store this selection even the power is off.
>> Shut down Procedures
WARNING !
Please follow the shut down procedures strictly to avoid damage to the heater. Always cool
down the heater before shutting off the compressed air supply.
1
Disable the heating by pressing the HEAT button if the machine is previously in the heating
mode.
2
Observe the indicated nozzle temperature, the temperature should start to drop.
3
Wait until the nozzle temperature is below 60
C, depending on the previous temperature and
surrounding environment, it may take 5-10 minutes.
4
Confirm that the temperature is below 60
C, then switch off the machine by pressing the red
power OFF button.
5
Follow by switching off the compressed air by turning the main air ON/OFF switch knob.
Select preferred language
