AI-002 operation manual
Issue 1 21.09.09 display version 13 . main controller version 69 . servo version 61
P.58 of 59
Appendix D . Tape Start, Tape Middle, Tape End Parameters
> Tape End Program (cont.)
> Tape End Program > after cut roller stop position
This setting controls the timing of the top roller stopping rotating after the tape is cut. Position is
a reference number that is reset to 0 after tape is cut. With the upper roller continue to rotate
after the cut, this reference number also increase. A smaller setting will make the roller stopping
quicker after the cut. A larger setting makes the roller stops later after the cut.
