AI-002 operation manual
Issue 1 21.09.09 display version 13 . main controller version 69 . servo version 61
P.15 of 59
>
Control Method
>> Touch Screen Control Panel
Almost all settings and timing control of the machines can be input from the touch screen control
panel. Use you finger tip to touch the parameter to be modified. Switch to different pages to modify
other parameters (refer to section on control menu navigation). The screen has a protective cover
to prevent the surface from damage and scratch, however, avoid using excessive force when
touching the panel. You can also change the contrast of the display so as to obtain the best picture
when viewing at a different angle.
>> Foot Switch
There are 2 foot pedals for the machine. The design of these pedals is such that they can be
operated either individually or in combination to achieve a number of preset tasks by the
operator‟s feet only. As a result, the operator‟s hands are free to manipulate the processing fabric.
Left foot pedal
The left pedal is a multi function pedal. You can use it to raise the upper roller and start sealing .
To raise the upper roller - heel back the left foot pedal.
To start sealing - press forward.
Right foot pedal
The right pedal is a simple switch. It performs different function according to the timing.
During idle
– jog function that makes the rollers rotate forward without the nozzle coming in.
During idle
– cut function that cuts the tape if left pedal is in heel back position.
During sealing
– cut function that cuts the tape
