HANDAN CV-7000 HD User Manual Download

Page: 36 / 40

• MPEG-4 part 10 / H.264 Main Profile Level 4

• MPEG-2 HD (MP@HL) or SD (MP@ML) video decode

• European DVB standard digital cable reception

• HDMI Multimedia Output Supported

• Interfacing with the CAM module of DVB Common Interface standard

• Embedded CONAX with one smart card reader

• Constellation : 16 / 32 / 64 / 128 / 256 QAM

• Channel search mode : Network / Auto / Manual

• Teletext supported : OSG & VBI insertion for TV

• Subtitle supported : DVB subtitle / Teletext subtitle

• Dolby AC3 digital audio bitstream out through S/PDIF

• EPG : Present / Following & Scheduled EPG

• Over-The-Cable SW download

• Parental lock : Channel lock / Install lock / STB lock

• Variable aspect ratio : 4:3 (Full, Center, Letter Box) / 16:9

• Timer : On timer / Off timer / Sleep timer / VCR timer

• Channel grouping : Favorite / Network / CAS / A-Z

• Volume offset for each channel

FEATURES

Summary of Contents for CV-7000 HD









































Search results

Summary of Contents for CV-7000 HD

Reviews:

Related manuals for CV-7000 HD

Brands by name

Popular brands

HANDAN CV-7000 HD, User Manual

Search results

Summary of Contents for CV-7000 HD

Reviews:

Related manuals for CV-7000 HD

Brands by name

Popular brands