manualshive.com logo in svg

HANDAN CV-7000 HD, User Manual

Share
Download
HANDAN CV-7000 HD User Manual Download Page 27

26

Software Update

Factory Reset

Version Information

Here you can reset the receiver to its original settings. 

All changes made to the settings will be removed.

1.If you want to reset the receiver, select Yes and press 

OK under [Start].

You can find the detailed information of the hardware 
version and software version of the receiver.

You can upgrade the receiver with new software via 
network.

If new software version is available, the upgrade will 
perform automatically when the receiver is restarted
(switch to Stand-by and then restart.)

The receiver can also be upgraded manually:
1. Select [Factory 1], select [Start], and press 

OK

. 

2. You can enter the parameters for the software 
upgrade by selecting [User Setting]. Enter the 
frequency, modulation and symbol value. 

NOTE: Updating the receiver software may also reset 

the channel list settings to their default values. 

MENU GUIDE

MENU GUIDE

System Information

Summary of Contents for CV-7000 HD









































Reviews:

No comments

Brands by name

Popular brands

Load more brands