Hand Held Products Scanteam 5700, User Manual, Page: 78 / 100

7–2 SCANTEAM 5700 User’s Guide
Laser Output only
5700–X0
(Laser Compatible Bar Image)
Conventional laser data format is provided at the modular connector in the
scanner handle.
Signal Function
Interface cables normally supplied with scanner model 5700–X0 are terminated
with an 10 pin modular plug (P1) and a 9 pin Type D (Squeeze–to–release)
connector (P2) that is compatible with all Welch Allyn terminals. See chart below.
2
3
4
5
6
7
8
9 1
2
3
4
5
6
7
8
9
P2 P1
9 Pin Type D Female 10 Pin Modular Plug
Pin 1
Pin 10
6 9
1 5
N/C
Enable
Ground
Good Read
Data
+5VDC
Trigger
SOS
Cord Shield
Laser Enable
Supply Ground
Turn on Good Read LED or Beeper
Digital Bar Code Data Output
5 Volt Power Connection
Trigger Signal to Decoder
Start of Scan
Braid
P1 P2
View A–A
P2 connects to
your terminal.
P1 connects to the
scanner handle.
♦
Pins 4 and 9 are populated depending on power supply voltage option.
Note: Some decoders may have +12V on pins 4 or 9. Connect to +5VDC
ONLY!
♦
♦