Hand Held Products IT3800, User Manual

Page: 18 / 164

1 - 6 IT3800/3900 User’s Guide
Mounting Information, continued
Specular Zone
The IT3900 must be mounted at a 5 degree, or greater, angle to the bar code in
order to scan properly:
The scanner is now connected and ready to communicate with your terminal/PC.
You must program the scanner for your interface before bar code data can be
transmitted to your terminal/PC. If you are using the scanner as a keyboard
wedge, turn to
page 2-1 . If the scanner is connected via a serial port, turn to
page 2-8 . If this is a wand emulation application, turn to page 2-15 , and for a non
decoded output connection, turn to page 6-2 .
Plug and Play
Plug and Play bar codes provide instant scanner set up for commonly used
interfaces.
Note: After you scan one of the codes, power cycle the host terminal to have the
interface in effect.
The most common interface is Keyboard Wedge. The following Keyboard
Wedge bar code also programs a carriage return (CR) suffix.
Keyboard Wedge Interface for IBM PC AT and
Compatibles