manualshive.com logo in svg

Hand Held Products IT3800, User Manual, Page: 155 / 164

Share
Download
Hand Held Products IT3800 User Manual Download Page 155

IT3800/3900 User’s Guide

15 - 1

15

Customer Support

Product Service and Repair

Hand Held Products provides service for all its products through service centers 
throughout the world.  To obtain warranty or non-warranty service, return the unit 
to Hand Held Products (postage paid) with a copy of the dated purchase record 
attached.  Contact the appropriate location below to obtain a Return Material 
Authorization number (RMA #) before returning the product.

North America

Hand Held Products Corporate Offices
Telephone:  (800) 782-4263, Option 3
Fax:  (704) 566-6015
E-mail:  [email protected]

America Latina

Hand Held Products America Latina
Teléfono: (239) 263-7600
Fax:  (239) 263-9689
E-mail:  [email protected]

Brazil

Hand Held Products Brazil
Telephone:  +55 (21) 2176-0250
Fax:  +55 (21) 2176-0249
E-mail: [email protected]

Europe, Middle East, and Africa

Hand Held Products Europe
Tel 31 (0) 40 29 01 633
Fax: + 31 (0) 40 2901631
E-mail:  [email protected]

Asia Pacific

Hand Held Products Asia/Pacific
Telephone:   +852-2511-3050 
Fax:   +852-2511-3557
E-mail:  [email protected]

Japan

Hand Held Products Japan
Telephone:   +81-3-5770-6312 
Fax:   +81-3-5770-6313 
E-mail:  [email protected]

Summary of Contents for IT3800





































































































































































Reviews:

No comments