Hand Held Products IMAGETEAM 3800i, User Manual

Page: 46 / 168

3 - 2 3800i/3800r User’s Guide
Beeper Duration – Good Read
The beeper duration codes modify the length of the beep the scanner emits on a
good read.
Default = Normal.
LED – Good Read
The LED indicator can be programmed On or Off in response to a good read.
Default = On.
Number of Beeps – Good Read
The number of beeps of a good read can be programmed from 1 - 9. The same
number of beeps will be applied to the beeper and LED in response to a good
read. For example, if you program this option to have five beeps, there will be
five beeps and five LED flashes in response to a good read. The beeps and LED
flashes are in sync with one another. To change the number of beeps, scan the
bar code below and then scan a digit (1-9) bar code and the Save bar code on
the
Programming Chart inside the back cover of this manual. Default = One.
* Normal Beep
Short Beep
* On
Off
Number of Pulses