Hand Held Products Imageteam 3220, User Manual

Page: 21 / 67

Programming the Scanner
3-7
Program & End
Scan
“ PROGRAM ”
Scanner enters programming mode,
and inhibits all non-programming functions.
Scan
“
END
”
Scanner exits programming mode, and stores all
parameters in Flash Memory ASIC or non-volatile memory,
then issues the completion beep ( 3 short beeps ).
Please note that the scanner will take 3-4 seconds to store
parameters in internal Flash Memory ASIC or non-volatile
memory after you scan the “
END . ” Please do not turn off
the power before the completion beep. It may destroy all
configured parameters.
System List & Master Default
Scan “ M_DEFAULT ”
Scanner returns all programmable
parameters to factory preset configurations,
then issues the completion beep ( 3 short beeps ).
Scan “ SYSLIST ”
Scanner lists the product information and
revision number to host via selected host interface,
then issues the completion beep ( 3 short beeps ).