Hand Held Products DOLPHIN 7600 User Manual Download

Page: 87 / 108

Dolphin® 7600 Series User’s Guide

Rev B

1/17/2007

8 - 9

Popup Menu

Double-tap on a found device and a popup menu appears that enables you to connect to that device and use the service.

Menu Item

Description

Trusted &/or
Untrusted

Changes the found device to a trusted or untrusted device.

Untrusted devices

Appear with a

icon.

Trusted devices

Appear with a

icon.

Depending on the device and service selected, you may need to authenticate when changing an
untrusted device to a trusted device.

Active

Select

Active

to activate a connection to the device and service.

Active appears inactive is the device is not Trusted.
A checkmark appears next to this item if the connection is active.

Authenticate

Select

Authenticate

to require the Dolphin terminal to authenticate on connecting.

Authenticate appears inactive is the device is not Trusted.
Authenticate appears with a checkmark to the left if authentication has already occurred.

Encrypt

Encrypt appears inactive if the device is not Trusted.
Encrypt with a checkmark to the left if encryption has already occurred.

Delete

Deletes the found service. (Other services available on the same device remain in the list.)

Summary of Contents for DOLPHIN 7600













































































































Search results

Summary of Contents for DOLPHIN 7600

Reviews:

Related manuals for DOLPHIN 7600

Brands by name

Popular brands

Hand Held Products DOLPHIN 7600, User Manual

Search results

Summary of Contents for DOLPHIN 7600

Reviews:

Related manuals for DOLPHIN 7600

Brands by name

Popular brands