Hand Held Products DOLPHIN 7600, User Manual

Page: 67 / 108

Dolphin® 7600 Series User’s Guide Rev B 7 - 11
WPA Settings Tab
This tab controls the WPA settings. This tab window is available only if Provide encryption key dynamically is selected on the
WEP Mgmt tab is selected.
Field Description
WPA Mode This drop-down list contains the following options:
•
Disabled —Do not enable WPA mode. This is the default selection.
• WPA 802.1x —Enable WPA and obtain key information through the 802.1x protocol.
• WPA PSK —Enable WPA with Pre-Shared Key (PSK) information entered in the field below.
This mode is used if the 802.1x protocol is not being used for authentication.
Encryption Select the desired encryption.
•
WEP —The least secure of the encryption methods. WEP uses a single encryption key of
either 40 or 104 bits. WPA uses a 256 bit Pre-shared key.
• TKIP —Uses the standard WEP format, but changes the key with every frame for improved
security and includes a message integrity capability for determining unauthorized packet
insertion.
PSK pass-phrase This field activates if you select WPA PSK as the mode.
This field accepts only
•
Hexadecimal keys that are 64 characters long
• ASCII: 8–63