background image

16

4230 Quick Start Guide

Limited Warranty

Hand Held Products, Inc., ("Hand Held Products, Inc.") warrants its products to 
be free from defects in materials and workmanship and to conform to Hand Held 
Products, Inc.' published specifications applicable to the products purchased at 
the time of shipment.  This warranty does not cover any Hand Held Products, Inc. 
product which is (i) improperly installed or used; (ii) damaged by accident or 
negligence, including failure to follow the proper maintenance, service, and 
cleaning schedule; or (iii) damaged as a result of (A) modification or alteration by 
the purchaser or other party, (B) excessive voltage or current supplied to or 
drawn from the interface connections, (C) static electricity or electro-static 
discharge, (D) operation under conditions beyond the specified operating 
parameters, or (E) repair or service of the product by anyone other than Hand 
Held Products, Inc. or its authorized representatives.

This warranty shall extend from the time of shipment for the duration published 
by Hand Held Products, Inc. for the product at the time of purchase ("Warranty 
Period").  Any defective product must be returned (at purchaser's expense) 
during the Warranty Period to Hand Held Products, Inc.' factory or authorized 
service center for inspection.  No product will be accepted by Hand Held 
Products, Inc. without a Return Materials Authorization, which may be obtained 
by contacting Hand Held Products, Inc..  In the event that the product is returned 
to Hand Held Products, Inc. or its authorized service center within the Warranty 
Period and Hand Held Products, Inc. determines to its satisfaction that the 
product is defective due to defects in materials or workmanship, Hand Held 
Products, Inc., at its sole option, will either repair or replace the product without 
charge, except for return shipping to Hand Held Products, Inc..

EXCEPT AS MAY BE OTHERWISE PROVIDED BY APPLICABLE LAW, THE 
FOREGOING WARRANTY IS IN LIEU OF ALL OTHER COVENANTS OR 
WARRANTIES, EITHER EXPRESSED OR IMPLIED, ORAL OR WRITTEN, 
INCLUDING, WITHOUT LIMITATION, ANY IMPLIED WARRANTIES OF 
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.

HAND HELD PRODUCTS' RESPONSIBILITY AND PURCHASER'S 
EXCLUSIVE REMEDY UNDER THIS WARRANTY IS LIMITED TO THE 
REPAIR OR REPLACEMENT OF THE DEFECTIVE PRODUCT.  IN NO EVENT 
SHALL HAND HELD PRODUCTS BE LIABLE FOR INDIRECT, INCIDENTAL, 
OR CONSEQUENTIAL DAMAGES, AND, IN NO EVENT, SHALL ANY 
LIABILITY OF HAND HELD PRODUCTS ARISING IN CONNECTION WITH 
ANY PRODUCT SOLD HEREUNDER (WHETHER SUCH LIABILITY ARISES 
FROM A CLAIM BASED ON CONTRACT, WARRANTY, TORT, OR 
OTHERWISE) EXCEED THE ACTUAL AMOUNT PAID TO HAND HELD 
PRODUCTS FOR THE PRODUCT.  THESE LIMITATIONS ON LIABILITY 
SHALL REMAIN IN FULL FORCE AND EFFECT EVEN WHEN HAND HELD 
PRODUCTS MAY HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH 
INJURIES, LOSSES, OR DAMAGES.  SOME STATES, PROVINCES, OR 
COUNTRIES DO NOT ALLOW THE EXCLUSION OR LIMITATIONS OF 
INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE 
LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU.

Summary of Contents for 4230

























Reviews: