Hand Held Products 4230, Quick Start Manual

Page: 10 / 24

6 4230 Quick Start Guide
Changing Bluetooth PIN Code
Some devices require a PIN code as part of the Bluetooth security features. Your
imager’s default PIN is 1234, which you may need to enter the first time you
connect to your PDA or PC. To change the PIN, scan the bar code below and
then scan the appropriate numeric bar codes from the
Programming Codes on
page 9. Scan Save to save your selection.
Unlinking the Imager
If the Bluetooth device (dongle) has an imager linked to it, that imager must be
unlinked before a new imager can be linked. Once the previous imager is
unlinked, it will no longer communicate with the dongle. To unlink an imager from
the Bluetooth device (dongle), scan the Unlink Imager bar code below.
Out-of-Range Notification
If you are out of range when you scan a bar code, you will receive an error beep.
You receive the error beep since the data could not be communicated to the host.
Useful Menu Bar Codes
Manual/Serial Trigger Mode
Bluetooth PIN
Unlink Imager
Manual/Serial Trigger