Hanbay MD DT-10.31 Series, User Manual, Page: 2 / 8

HANBAY Inc User Manual MDx-xxxDT-10.31
Page 2 of 8 www.hanbayinc.com
Rev: 2
– July, 2019
1 800 315 4461
hanbaysales@hanbayinc.com
Wiring:
The actuator comes standard with a Turck 6 position connector
and a 20’ cable with plug. Cut the cable to the
length required and then connect according to the following wire color schematic:
Wire color schematic for
“Turck6” cable:
Otherwise, if the Turck cable is not included in your actuator, see pg.8 for more detailed wiring instructions.
Pin Colour Function
6 White -> +24VDC
5 Black -> Power Gnd.
4 Pink -> Output TT2
3 Grey -> Output TT1
2 Blue -> Signal Input TT2
1 Brown -> Signal Input TT1
Connect the power:
The MDx-xxxDT may be connected to voltages ranging from 12
– 24 VDC
The power consumption will range from max. 3.0A to approx. min. 100mA
when the actuator is active. When not moving, the actuator draws around
30mA.
Terminal
1 2 3 4 5 6