User Manual MCx-B-xxxAx-8.09
Page 2 of 13
www.hanbayinc.com | 1 800 315 4461
Rev.2021.7 [email protected]
INSTALLATION
Mounting
In most cases, the actuator must be mounted
and supported as shown in the image to the
right. The mounting bracket is not supplied by
Hanbay.
Exceptionally, the actuator may be suspended
on the tubing itself but ONLY if the application is
vibration free a
nd the tubing is minimum ¼” dia.
stainless.
Wiring
The actuator comes standard with a Turck 5 position connector
and a 20’ cable with plug. Cut the cable to
the length required and then connect according to the following wire color schematic:
Wire color schematic for “Turck 5” cable:
Pin Colour
Function
6
White
+24 VDC
5
Black
Power Gnd.
4
Grey
Output Signal (4-20 mA)
*
3
Not connected
2
Brown
Isolated
**
Input Signal Gnd.
1
Blue
Isolated
**
Input + Signal (4-20 mA)
* “feedback” available in MCx-Lx-xxxA
F
version of actuator only.
** “isolated” available in MCx-Lx-xxxA
I
and xxxA
F
versions of actuator only.
Mounting
Bracket
Cable Entry
