EN
10
DESCRIPTION
ABOUT THE SOLAR ENERGY SYSTEM
The solar energy system with flexible panels
is an elegant, economic and practical system
based on very effective and lightweight solar
panels, joint negative terminals and advanced,
maximum power point tracking (MPPT).
The operating status is shown on a display on
the main unit and on an auxiliary display on
the remote control panel. The MPPT controller
controls the solar cells on the basis of the
current operating conditions to the run point
where they produce their maximum power.
This can increase energy recovery by up to
20 - 30% in comparison with solar energy
systems with pulse width modulation (PWM).
The system has built-in overcurrent protection
for the battery charging circuits as well as the
option to connect external protection via the
RS485 port, which makes the system very
reliable and adjustable to different installation
requirements. The MPPT charge controller has
an adaptive three-stage charging algorithm
based on digital control circuits, which
increases both the life span of the batteries
and system performance. The system also
has electronic protection from overcharging,
overdischarging and reverse polarisation of
solar panels and batteries, which makes the
system very reliable and robust. The charge
controller is ideal for campers, base stations
for radio communication, households,
monitoring of field installations and many
other applications.
INSTALLATION
POSITIONING
Choose a position for installation with as much
direct solar radiation and as many unshadowed
hours of sunlight per day as possible.
SAFETY INSTRUCTIONS
• The solar panel generates voltage when
exposed to light. Follow all the relevant
electrical safety regulations.
• The product must only be installed and
maintained by suitably qualified
personnel.
• Pay attention to high DC voltages when
connecting solar panels.
• Avoid scratching or otherwise damaging
the back of the panel.
SYMBOLS
Read the instructions.
Approved in accordance with
the relevant directives.
Recycle discarded product
in accordance with local
regulations.
TECHNICAL DATA
Solar cell type
Monocrystalline
Voltage
12 V
Max output (Pmax)
100 W (± 5%)
Open circuit voltage (Voc)
20.5 V
Short circuit voltage (Isc)
7.1 A
Max operating voltage (Ump)
18.0 V
Max operating current (Imp)
5.89 A
Standard test conditions
AM 1.5, 1000 W/m², 25°C
Operating temperature
–40°C to +85°C
Size
990 x 690 x 2.5 mm
Weight
2.5 kg
Summary of Contents for 010485
Page 3: ...1 2 1 2 3 3...
