EN
11
INSTALLATION
The installation can be done in several different
ways, the most important thing is that the
solar panel is not installed where the sunlight
is shadowed. A suitable method is hanging
from hooks or a line. The panel has pre-drilled
holes for this.
CONNECTION
Up to four 100 W solar panels can be
connected to the same circuit. The diagrams
show examples of installation with a single
solar panel and with parallel connection of
4 solar panels with a total output of 400 W.
1. Article number 010501
2. Article number 010486 (accessory)
3. Load/consumer
FIG. 1
FIG. 2
NOTE:
• More than 4 solar panels should NOT be
connected in parallel.
• The solar panel has been subjected to a
flexural strength test of 30 degrees of
curvature. Do not exceed this, and
protect the panel from knocks and blows
– risk of damaging the panel.
• The efficiency of the solar panel can
diminish in time. This is not a fault – it is
normal that solar cells become less
efficient over the years. External factors
such as the intensity of the solar
radiation at the installation point,
fouling, snow and the ambient
temperature, can also affect the
performance of the solar panel.
Summary of Contents for 010485
Page 3: ...1 2 1 2 3 3...
