7.
Figure 13
Attaching the Switch Housing
NOTE:
Before starting installation, disconnect the power by turning off the circuit breaker or
removing the fuse at fuse box. Turning power off using the fan switch is not sufficient to prevent
electric shock.
1. Remove the 1 of 3 screws from the mounting ring and keep it for future use. Loosen the other 2
screws. (Do not remove)
2. Place the key holes on the switch housing over the 2 screws previously loosened from the
mounting ring, turn switch housing until it locks in place at the narrow section of the key holes.
Secure by tightening the 2 screws previously loosened and the one previously removed. (Fig. 13 )
3. Snap together the wire connection plugs.
Mounting ring
Connectors
Screws
Switch
housing
Summary of Contents for WITHROP 656 413
Page 1: ......
