HAMPTON BAY SKU 776-449, Instruction Manual

Page: 4 / 24

Page 4
PARTS INCLUDED FOR ASSEMBLY (parts are not to scale):
1ea Canopy (#1) 1ea Screw Collar Loop (#2) 6 feet Chain (#3) 1ea Ring (#4)
1ea Loop (#5) 1ea Nipple (#6) 1ea Hex Nut (#10) 1ea Nipple B (#11)
1ea Nipple A (#7)
1ea Decorative Ball (#12) 1ea Finial (#13) 3ea Socket Sleeve (#15) 3ea Shade (#16)
ASSEMBLY INSTRUCTIONS:
1.
Carefully unpack the fixture. Lay out all parts on a clean surface. Evenly spread the
fixture arms to open the chandelier (see Fixture Distribution on Page 5).
2.
Screw the Loop (#5) onto the Nipple (#6). Use pliers and a screwdriver to twist open the
link (cover the chain with cloth to prevent damage to the link finish) at the end of the
Chain (#3) not attached to the Screw Collar Loop (#2). To avoid damage to the link,
only open the link enough to hook it onto the Loop (#5). Hook the open link to the Loop
(#5) and then close the link.
3.
Weave the fixture wires up through the Loop (#5), through the Chain (#3), through the
Ring (#4), through the Screw Collar Loop (#2), through the Canopy (#1), and through
the Nipple (#23 on Page 7) on the Mounting Strap (#22 on Page 7). Screw the Nipple
(#23) into the Screw Collar Loop (#2).
4.
Screw Nipple A (#7) into the Bushing (#8). Screw Nipple B (#11) a half-inch into
Bushing A (#9). Tighten the Hex Nut (#10) against Bushing A (#9) to secure Nipple B
(#11). Place the Decorative Ball (#12) over Nipple B (#11). Screw the Finial (#13) onto
Nipple B (#11) to secure the Decorative Ball (#12).
5.
Place the Socket Sleeves (#15) and then the Shades (#16) over the Sockets (#14).
6.
Install three 60 watt candelabra incandescent light Bulbs (#17) (not included) or three
equivalent candelabra compact fluorescent light bulbs (not included) in the three
Sockets (#14).