Page 5
ASSEMBLY INSTRUCTIONS:
1. Begin assembly at the bottom of the lamp.
2. Insert lamp pole (B) into base (A) and turn clockwise
to tighten.
3. Insert lamp pole (C) into lamp pole (B) and turn
clockwise to tighten.
4. Repeat above step with poles D and E.
5. Insert the shade holder (F) into lamp pole (E) and turn
clockwise to tighten. You may need to pull any excess
cord gently through the poles so that these parts fit.
6. Unscrew the wing nut (H) from the screw (I), Place the
shade (G) onto shade holder (F)
and matching the screw
(I), turn wing nut (H) onto screw (I) clockwise to tighten.
7. Unscrew the socket ring (L) counter-clockwise from
the socket (J).
8. Place the shade (K) to the socket (J) and turn the
socket ring (L) clockwise to tighten.
9. Install (2) 150W maximum type A bulbs or CFL
equivalent (bulbs not included) in uplight. Install (1)
60W maximum type A bulb or CFL equivalent in reading
light (bulb not included).
