9.
Attaching the Fan Blades
Your fan features revolutionary advancements for quick and
easy blade installation.
To Install:
Hold the blade with both hands close to the blade arm and
press the blade down firmly. Ensure the key-slot holes are
properly seated on the blade bracket posts.
While still pressing the blade down with both hands, firmly
slide the blade away from the motor housing until the blade
engages in the locking mechanism. Make sure this springs
upward and butts against the edge of the blade, indicating a
secure connection.
To Uninstall:
Hold the blade with one hand by its tip. With the other hand,
press down firmly the spring locking mechanism, located on the
blade arm, to release the blade from the blade arm.
Slide the blade in towards the motor housing until the blade
disengages from the locking mechanism. While holding the
blade with both hands, carefully push the blade up to the
detach from the blade arm.
WARNING
FAILURE TO PROPERLY SEAT THE BLADES ON THE BLADE
BRACKETS AND ENGAGE THE LOCKING MECHANISMS
COULD RESULT IN THE FAN BLADES LOOSENING AND
POSSIBLY FALLING.
Figure 15A
Figure 15B
Figure 15C
Figure 15D
