6.
Making the Electrical
Connections
Remember
to disconnect the power.
NOTE
LIGHT KITS ARE AVAILABLE AT YOU
HAMPTON BAY RETAILER. THE FAN IS
ALREADY WIRED TO SUPPORT THE LIGHT KIT OPTION.
WARNING
TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR
OTHER PERSONAL INJURY. MOUNT FAN ONLY ON AN
OUTLET BOX OR SUPPORTING SYSTEM MARKED
ACCEPTABLE FOR FAN SUPPORT.
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK. DO
NOT USE THIS FAN WITH ANY SOLID-STATE SPEED
CONTROL DEVICE.
Follow the steps below to connect the fan to your household
wiring. Use the wire connecting nuts supplied with your fan.
Secure the connectors with electrical tape. Make sure there
are no loose strands or connections, you have 4 options:
Option 1: direct connection without remote as Figure 9.
Step 1
Connect the fan supply (black) wire and light supply
(blue) wire to the black household supply wire as shown in
Figure 9.
Step 2
Connect the neutral fan (white) wire to the white
neutral household wire.
Step 3
Connect the fan ground wire (green) to the household
ground wire.
Step 4
After connecting the wires, spread them apart so that
the green and white wires are on one side of the outlet box
and the black and the blue wires are on the other side.
Step 5
Turn the connecting nuts upward and push the wiring
into the outlet box.
Figure 10 (option 2), 11(option 3) illustrate the wiring
connections for optional wall control (available at your
Hampton Bay Retailer, the wire color out of wall control may
vary, see wall control's installation manual for correct wire
connections.) and Figure 12 (option 4) install with remote
control, see "Remote Control Installation" sheet.
SUPPLY CIRCUIT
Ground
Conductor
Outlet Box
Green
Ground
Lead
Ground to
Downrod
B
L
A
C
K
W
H
IT
E
W
H
IT
E
B
L
A
C
K
B
L
U
E
G
R
E
E
N
WHITE
BLUE
BLACK
WHITE
Figure 9
Diagram indicates optional light kit wiring.
Option 1: direct connection without remote.
SUPPLY CIRCUIT
Ground
Conductor
Outlet Box
Green
Ground
Lead
Ground to
Downrod
B
L
A
C
K
W
H
IT
E
W
H
IT
E
B
L
A
C
K
B
L
U
E
G
R
E
E
N
Figure 10
Light Switch
WHITE
BLUE
BLACK
WHITE
Diagram indicates optional light kit wiring.
Option 2: Light switch on wall, fan switch
on pull chain, without remote control
