34
|
Hampton® H15-10 Direct Vent Freestanding Gas Stove
|
34
installation
H15
LOG SET INSTALLATION
03/31/15
918-228a
Side 2 of 2
9)
Place the center cross log on the top of the rear log
and position as shown below.
Logs must be oriented as shown below.
10)
Test fi re to ensure proper light off (make sure fl ame
fl ows smoothly from one end of burner to the other).
If there is any fl ame hesitation, check that area for
any blockage of the burner ports.
11)
Re-install the Glass Front, Cast Front and Top.
8)
Take the embers and place on the burner in the
space between the 2 front logs, ensure not to cover
any burner ports. Do not put embers on the burner
in the area between the front logs and the rear log.
See photo below.
Separate platinum embers and place at the front
of the burner in and around where the embers are
placed. Avoid stacking platinum embers.
A
A
A
D
D
C
C
B
B
