8
Removing the track head from the track
Operation
Care and Cleaning
CAUTION:
Problem
Possible Cause
Solution
Make sure the power supply is on.
There is a faulty wire connection.
There is a faulty switch.
The light will not illuminate.
□
□
□
□
□
□
□
□
□
□
□
Use a dry or slightly dampened, clean cloth (use clean water, never use a solvent) to wipe the interior and exterior surfaces of the
Troubleshooting
The power is off.
Check the wiring.
you are not comfortable troubleshooting
wiring problems.
Test or replace the switch.
track head (G) to cool down.
Pull down on the track head connector’s locking tab (H), and twist until
the track head (G) disengages.
□
G
F
H
