AN EXTRA SWITCH CUP COVER IS
INCLUDED TO USE YOUR FAN
WITHOUT THE LIGHT FIXTURE.
WARNING: To reduce the risk of electri-
cal shock, insure electricity has been turned
off at the circuit breaker or fuse box before
beginning.
1. Remove and retain the three serrated head
screws that secure the fixture to the bottom
of the switch cup.
2. Carefully pull down the light fixture and dis-
connect the two plugs that connect the light
kit to the fan. Tuck the wires from the fan
into the switch cup.
3. Align the three screw holes in the extra
switch cup cover with the three key slots in
the switch cup. Make sure the notch in the
extra switch cup cover clears the reversing
switch in the switch cup.
4. Position the extra switch cup cover on the
switch cup and install the three serrated head
screws that were removed in step 1. Turn
the extra switch cup cover clockwise until
it locks and tighten the three serrated head
screws.
10.
Figure 18
Figure 19