background image

Figure 236, Page 5

OPERATION CHECKLIST

Operation Checklist

Before Operating:

After Operation

For a safe and pleasurable heating experience, perform this check before each use.

1. Gas control is in OFF position.

2. Gas tank valve is OFF.

3. LP/NG is disconnected.

1.  I am familiar with the entire owner’s manual and understand all precautions noted.
2.  All components are properly assembled, intact and operable.
3.  No alterations have been made.
4. 

All gas connections are secure and do not leak.

5. 

Wind velocity is below 16 km/h (10 mph).

6. 

Unit will operate at reduced efficiency below 4.44°C /40°F

7. 

Fire pit is outdoors (outside any enclosure).

8.  There is adequate fresh air ventilation.
9. 

Fire pit is away from gasoline or other flammable liquids or vapours.

10. 

Fire pit is away from windows, air intake openings, sprinklers and other water sources.

11. 

Fire pit is at least 122 cm (48 in) on rear and at least 122 cm (48 in) on sides from combustible 

materials.

12. Fire pit is on a hard and level surface.
13. There are no signs of spider or insect nests.
14. All burner passages are clear.
15. All air circulation passages are clear.
16. 

Children and adults should be alerted to the hazards of high surface temperatures and should keep 

away to avoid burns or clothing ignition.

17. 

Young children should be carefully supervised when they are in the area of the fire pit.

18. 

Clothing or other protective material should not be hung from the fire pit, or placed on or near fire pit.

19. Any guard or other protective device removed for servicing the fire pit must be replaced prior to 

operating the fire pit.

20. Installation and repair should  be  done  by  a  qualified  service  person.  The  fire  pit should be 

inspected before use and at least annually by a qualified service person.

21. More frequent cleaning  may  be  required  as  necessary.  It  is  imperative  that  control burner and 

circulating air passageways of the fire pit be kept clean.

22. Do not use this appliance if any part has been under water. Immediately call a qualified service 

technician to inspect the appliance and to replace any part of the control system and any gas control 

that has been under water.

Summary of Contents for Bromo 36
















Reviews: