Assembly — Attaching the Fan Blades
12
Fastening the blade
assemblies to the motor
11
Attaching the blades to the
blade arms
□
The fan motor assembly (F) is shipped with rubber
packing mounts (III) to prevent movement during
transportation. Remove the five rubber packing
mounts (III) from the fan motor assembly and discard
prior to attaching the blade arms.
□
Attach blades (G) to blade arms (H) using the three
screws with fiber washers provided with the blade
attachment hardware (BB). Start a screw with fiber
washer (BB) into the blade arm (H), but do not
tighten.
□
Repeat for the two remaining screws and fiber
washers (BB).
□
Tighten each screw securely starting with the center
screw. Make sure the blade (G) is straight.
□
Repeat steps for the remaining blades.
□
Align motor holes to blade arms (H) and secure with
screws (CC) provided; tighten screws securely.
□
Repeat this procedure for the remaining blade arms
(H).
WARNING:
To reduce the risk of personal injury, do not
bend the blade arms (H) while installing, balancing the blades
(G), or cleaning the fan. Do no insert foreign objects between
rotating fan blades (G).
10
Removing the rubber
packing mounts
F
III
H
G
B
F
CC
II
15
HAMPTONBAY.COM
Please contact 1-877-527-0313 for further assistance.
BB
H
G
