HAMPTON BAY 6940500313795, Instruction Manual

Page: 4 / 24

Page 4
PARTS INCLUDED FOR ASSEMBLY (parts are not to scale):
1ea Canopy (#1) 1ea Bushing (#5) 1ea Nipple A (#7)
1ea Nipple (#4) 1ea Rod B (#6) 1ea Rod A (#8)
1ea Shade (#12) 2ea Screws (#13) 1ea Decorative Frame (#14) 1ea Bushing A (#23)
ASSEMBLY INSTRUCTIONS:
1.
Carefully unpack the fixture. Lay out all parts on a clean surface. This fixture
can be installed as a mini-pendant, or as a flushmount.
2.
For a mini-pendant, weave the fixture wires up through Rod A (#8), through
Rod B (#6), and through the Nipple (#4) on the Canopy (#1). The height of the
fixture can be adjusted by using fewer rods (each rod is 12 inches long). For a
flushmount, weave the fixture wires through Bushing A (#23) and then through
the Nipple (#4) on the Canopy (#1).
3.
For a mini-pendant, screw Rod A (#8) onto Nipple B (#9). Screw Rod B (#6)
onto Nipple A (#7). Screw the Nipple (#4) into the Bushing (#5). For a
flushmount, screw Bushing A (#23) onto Nipple B (#9). Screw Bushing A (#23)
onto the Nipple (#4).
4.
For either fixture, install a 60 watt medium base incandescent light Bulb (#11)
(not included) or an equivalent standard base compact fluorescent light bulb
(not included) in the Socket (#10).
5.
For either fixture, screw the Shade (#12) into the Cover (#22). Place the
Decorative Frame (#14) over the Shade (#12), and align the two holes on the top
of the Decorative Frame (#14) to line up with the two holes underneath the Top
Cover (#21). Use a screwdriver to screw the two Screws (#13) through the two
holes on the Decorative Frame (#14) to secure it to the Top Cover (#21).