WARNING: HOOK UP IN "SERIES ONLY" DO NOT CONNECT THE HOT AND NEUTRAL WIRES OF ELECTRIC
CIRCUIT TO THE TRANSMITTER WALL SWITCH - DAMAGE TO THE SWITCH AND POSSIBLE FIRE COULD
OCCUR.
Step 1.
Remove the existing wall plate and switch from the wall junction box.
Step 2.
Step 3.
(Fig.
) Carefully tuck the wire connections inside the junction box. Secure the wall transmitter with the two screws
provided. Attach the wall plate over the wall transmitter and secure with the two screws provided.
Make the electrical connections as shown in (Fig. 14). If your outlet box has a ground wire (green or bare copper) connect
the wall transmitter's ground wire to it; otherwise connect the wall transmitter's ground wire directly to one of the screws from the
outlet box.
15
Figure 15
REMEMBER to Shut the Power Off at the Circuit Breaker or Fuse Box.
6. Installing the Wall Transmitter
