Operating the Transmitter 11.
Restore power to ceiling fan and test for
proper operation.
1.
" LOW, MED, HI"
buttons:
These three buttons are used to set the fan
speed as follows:
LOW
= Low speed
MED
= Medium speed
HI
= High speed
2.
"FAN OFF"
button:
This button turns the fan off.
3. The
"LIGHT"
button turns the light ON or
OFF and also controls the brightness setting.
Press and release the button to turn the light
ON or OFF. Press and hold the button to set
the desired brightness. The light key has an
auto-resume, it will stay at the same
brightness as the last time it was turned off.
4.
"OFF-ON
" Slide Button: This button turns
the power Off and On to the Fan and Light(s).
5. "
REV"
Button: This button is used to change
the direction of the rotation of the blades;
forward for warm weather or reverse for
warm weather.
W a r m w e a t h e r - ( C o u n t e r - C l o c k w i s e
direction) A downward airflow creates a
cooling effect.(Fig. 22) This allows you to
set your air conditioner on a higher setting
without affecting your comfort.
Cool weather-(Clockwise direction) An
upward airflow moves warm air off the
ceiling area.(Fig. 23) This allows you to set
your heating unit on a lower setting without
affecting your comfort.
Speed settings for warm or cool weather
depend on factors such as the room size,
ceiling height, number of fans, etc.
NOTE
:
To operate the reverse function on
this fan, press the reverse button while the
fan is running.
Figure 22
Figure 23
Figure 21
