background image

Hampton Bay Lifetime Limited Warranty

The retailer warrants the fan motor to be free from defects in workmanship and 
material present at time of shipment from the factory for a lifetime after the date of 
purchase by the original purchaser.  The retailer also warrants that all other fan parts, 
excluding any glass or plexiglass blades, to be free from defects in workmanship and 
material at the time of shipment from the factory for a period of one year after the date 
of purchase by the original purchaser.  We agree to correct such defects without 
charge or at our option replace with a comparable or superior model if the product is 
returned to the retailer.  To obtain warranty service, you must present a copy of the 
receipt as proof of purchase.  All costs of removing and reinstalling the product are 
your responsibility.  Damage to any part such as by accident or misuse or improper 
installation or by affixing any accessories, is not covered by this warranty.  Because 
of varying climatic conditions in the United States this warranty does not cover any 
changes in brass finish, including rusting, pitting, corroding, tarnishing or peeling.  
Brass finishes of this type give their longest useful life when protected from varying 
weather conditions.  A certain amount of wobble is normal and should not be 
considered a defect.  Servicing performed by unauthorized persons shall render the 
warranty invalid.  

There is no

 

other express warranty.  The retailer hereby 

disclaims any and all warranties, including but not limited to.  Those of 
merchantability and fitness for a particular purpose to the extent

 

permitted by 

law. 

 The duration of any implied warranty which cannot be disclaimed is limited to 

the time period as specified in the express warranty.  Some states do not allow 
limitation on how long an implied warranty lasts, so the above limitation may not 
apply to you.  

The retailer shall not be liable for incidental, consequential, or 

special damages arising out of or in connection with product use or performance

 

except as may otherwise be accorded by law.

  Some states do not allow the 

exclusion of incidental or consequential damages, so the above exclusion or 
limitation may not apply to you.  This warranty gives specific legal rights, and you 
may also have other rights which vary from state to state.  This warranty supersedes 
all prior warranties.

Lifetime Limited Warranty

Date Purchased  

Store Purchased

Model No.

Serial No.
 
Vendor No.

UPC

286-780

219032

792145330783

Summary of Contents for 286-780
















Reviews: