Finishing the
Installation
Step 1.
Tuck connections neatly into ceiling
outlet box.
Step 2.
Slide the canopy up to ceiling and
over the 2 screws on hanger bracket. Rotate
canopy clockwise. Next, while holding the
canopy with one hand, slide the canopy
cover over the screws and rotate clockwise
until tight. Note: adjust the canopy screws as
necessary until the canopy and canopy cover
are snug. (Fig. 11)
6.
Figure 11
SUPPLY CIRCUIT
Ground
Conductor
Outlet Box
Green
Ground
Lead
Ground to
Downrod
B
L
A
C
K
W
H
IT
E
WHITE
W
H
IT
E
WHITE
BLACK
B
L
A
C
K
BLACK
BLUE
B
L
U
E
G
R
E
E
N
Figure 10
WHITE
WHITE
BLUE
BLACK
ON
ON
Outlet box
Hanger
bracket
Canopy
Canopy
cover
Screws
WARNING
Make sure the notch on the hanging
bracket properly sits in the groove in the
hanger ball before attaching the canopy
to the bracket by turning the housing
until it drops into place.
