Assembly — Hanging the Fan
4
Installing the mounting bracket
to the electrical box
Hanging the fan to the
mounting bracket
□
Pass the 120 volt supply wires through the center
hole in the mounting bracket (A).
□
Install the mounting bracket (A) to the outlet box (OO)
with the screws and washers provided with your
outlet box (OO).
□
Securely tighten the two mounting screws.
WARNING:
To reduce the risk of fire, electric shock or
other personal injury, mount the fan only to an outlet box or
supporting system marked acceptable for fan support and
use the mounting screws provided with the outlet box.
WARNING:
The tab in the ring must rest in the groove of
the hanger ball (D). Failure to properly seat the tab in the
groove could cause damage to the wiring.
□
Carefully lift the fan motor assembly (F) up to the
mounting bracket (A) and seat the hanger ball (D) in
the mounting bracket (A) socket. Make sure the tab
on the mounting bracket (A) socket is properly seated
in the groove in the hanger ball (D). This will help to
balance the ceiling fan.
A
F
OO
A
D
5
9
HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.
