AA
AA
BB
F
6
Hang the power pack (F) on the Phillips screws (AA)
using the keyhole slots on the back and bottom of
the power pack (F).
□
□
□
□
□
6
Power pack installation
7
Installing the photo eye holder
Installation (continued)
9
□
A
B
Lay a length of low-voltage cable (G) in the general area where the
along the low-voltage cable.
FF
10 ft / 3,05 m
8
Distributing the cable
Drill a hole using a 1/4 in. drill bit at the desired location on an outside wall
and insert the anchor (CC). Secure the photocell holder (EE) by inserting the
Phillips screw (BB) through the photocell holder (EE) and into the anchor (CC).
FF
EE
G
CC
When selecting a location for the
photocell cable (FF), make sure it will
receive direct sunlight during the
day. DO NOT mount the
photocell
cable
system to shut off unexpectedly.
Insert the end of the photocell cable (FF) into the photocell socket (EE).
NOTE:
remote photocell (FF).
