ground wire with good performance and safety regulations. Ensure electrical safety
and personal safety.
4.
Do not open the control box cover without authorization. Please ask a qualified
electrician if you need to open it. Otherwise, it may cause injury or death.
5.
It is prohibited to flush with water or wash with jet water, as it is a waterproof device
whose waterproof level is: IPX4. Otherwise, the fryer may be damaged or personal
safety will be at risk.
6.
When heating, the oil temperature should not exceed 200
°C, otherwise fire risk is
likely to occur. This will also seriously affect food hygiene and safety (this may also
cause the temperature limiter to operate and cause an unexpected power failure).
7.
The power supply voltage used by the device must match the voltage on the product
nameplate. Voltage fluctuations is allowed in range of +5%-10%. Ignoring this, this
fryer will not work properly.
8.
The power plug should be in good contact when plugged into the socket. The middle
pole of the three plugs must be well grounded, otherwise it may cause an electric
shock.
9.
To prevent accidents, unplug the power cord when thunderstorms occur or when it is
not in use.
10.
Pull the plug with a dry hand. DO NOT pull the power cord, otherwise the cord will
be pulled and separated from the plug.
11.
The equipotential bonding terminal of the device is set at the lower rear of the fryer.
Multiple electrical devices should not be connected at the same time, as to avoid
potential difference and affecting the safety of use.
12.
When connecting, removing or unplugging, you must disconnect the external mains
supply first.
13.
Check whether the connection or control of each electrical component is normal
before starting the machine.
14.
Only personnel holding electrical operation certificates should install, electrically
connect and repair it.
ATTENTION:
1.
After heating, do not touch the pot by hand to avoid burns.
2.
This equipment should be protected from rain and moisture.
3.
Do not place fryer in a corrosive environment. This should be protected from severe
vibration and should not be inverted.
4.
Before using or energising and heating, the cooking oil must be added to the pot.
The amount of oil should not exceed the maximum oil level. Disregarding this will
cause equipment accidents and risk to personal safety.
5.
Keep away from flammable and explosive materials and keep away from places with
open flames.
Summary of Contents for TP-22L
Page 3: ......