background image

2

Safety 

This device is designed in accordance with the presently applicable technological standards. 

However, the device can pose a danger if handled improperly and inappropriately. 

Keep out of reach of children. 

Never leave the device unattended when in use.

Only use the device indoors. 

The device is not adapted for use with an external timer or remote control. 

Only a qualified technician should carry out repairs and maintenance of the device. Do not 

attempt to repair the device yourself. 

Original spare parts and accessories must be used in order to avoid malfunction. Warranties 

will be void in this case.

To prevent hazards and to ensure optimum efficiency, no modifications or alterations to the 

device that are not approved by the manufacturer may be undertaken.

This product is a commercial machine and it must be operated by trained cook.

Do not dismantle and refit the machine. Do not lift the upper module plate with sudden force 

and tilted installation. Dismantling and alterating this device in any way can cause serious 

hazards.

Before cleaning, unplug the machine and cut off the power supply. 

Do not spray water directly to the product. Electric shock may occur.

Do not pat the product or put heavy objects onto the product. 

Incorrect operation can cause damage to the equipment.

While the device is in use or after use, do not touch the box and module plate as the surface 

will be extremely hot. 

Do not use any power supply which is not inline with safety standards

The housing and the grill plates of the appliance will get hot during operation. Do 

not touch them with bare hands. Always use the operating handle in order to open 

the device. Use appropriate kitchen utensils for handling food. 

After switching off, the device will remain hot for some time. Before handling it, 

wait until the device cools down first. 

Never move this appliance during operation. 

The shell of this equipment must be grounded for safety sake. 

Follow the safety instructions listed in order to avoid any hazards:

In order to avoid risk of fire and damage to the device, never place kitchen utensils, 

towels, paper and the like on the grill plate during operation. 

Never operate the device near combustible, easily flammable materials (e.g. petrol, 

spirits, alcohol etc.). They evaporate through heating and in case of contact with ignition 

sources deflagrations can occur which can lead to serious personal injury and property 

damage. 

When a fire arises disconnect it from the power supply before you initiate appropriate 

measures for fire-fighting. Provide sufficient supply of fresh air. 

Caution: Never extinguish the fire with water when the power plug is connected to the 

socket, avoid electric shock.

Summary of Contents for PG-SA













Reviews: