9
OPERATION & USE
The voltage for this equipment must be coordinated with the supplied
voltage. Users should install a suitable power switch and breaker
switch near the fryer.
At the back of the device is the earth bolt. Please connect the earth
wire in compliance with the safety regulations with copper cable of no
less that 2mm².
Before using, check whether every connection is formed, voltage is
normal and ground connection is safe. 5. Do not use water to clean
the electric box directly. The installation of this stove must be done by
professionals.
This device must be operated by trained professionals.
Do not modify it in any way, any modifications of this product could
cause accidents and void your warranty.
Do not clean the product with a water jet or soak the electric box into
water while cleaning, this may cause electric
High temperatures will cause burns. When a fire-facing oven is in use
and before or after being used, do not directly touch the device, it will
be hot.
Do not use another power supply with a different voltage.
Do not use the main switch that is not coordinated with safety
regulations.
In a thunderstorm, shut off main switch to avoid the appliance being
damaged by possible lightning strike. Do not use hard or sharp object
to destroy the surface of oven body and the surface of oil pot.
After using, shut off the main switch.
The installation and maintenance of electric circuit must be carried
out by professionals.
If the power cord is damaged, contact the retailer you purchased the
unit from.
During transportation, the machine should be carefully handled and avoid
shaking it. The packaged machine should not be stored in the open air. It
should be put in a ventilated warehouse without corrosive gas. It should not be
put upside down. If it needs to be stored in open air temporary, measurement
against rain in needed.
