4
Introduction
Hammond XPK-100 Quick Features Guide
Using a Sequencer with the XPK-100 and MIDI Keyboards
The bottom diagram shows you how to connect a Sequencer to two manuals and the XPK-100:
Channel 1 -
Upper Manual
(Hammond Keyboard)
Channel 2 -
Lower Manual
Channel 3 -
Ped als
Use the above settings for recording your Sequence. Also, be sure to enable your Hammond Drawbar
Keyboard’s MIDI SOFT THRU function so that all the parts can be recorded. When you are ready to play
back your Sequence, be sure to:
1.
Turn MIDI SOFT THRU “OFF” on your Hammond Drawbar Keyboard.
2.
Disconnect the MIDI cable going out from your Hammond Drawbar Keyboard
into
your
Sequencer.
3.
Connect
the
MIDI
OUT
from
your
Sequencer
into
the
MIDI
IN
1
of
your
XPK-100.
Using
a
Sequencer
with
the
XPK-100
and
the
Hammond
XM-1
The
diagram
below
shows
how
to
connect
a
Sequencer
to
a
set
of
MIDI
instruments
including
the
Hammond
XM-1. No reconnecting of cables is necessary between the Record and Play operations.