Hammond SKX, Reference Manual

Page: 337 / 398

MIDI
323
From the previous screen, touch the PAGE RIGHT Touch Button once. Page 3 of the External Zone Edit Menu
should now display. The legend just underneath the word “M-BNK” should now blink.
External Zone Page 3 - Program Change and Bank Select
What Is “Bank Select?”
“Bank Select” is closely related to “Program Change.” If you go to page 308, you will find a complete explanation
of MIDI Programs, particularly as they relate to General MIDI. As explained there, General MIDI provides for a
variety of different sounds, called Programs and grouped by instrument type. However, General MIDI only allows
128 separate Programs and does not allow for variations of instruments. Thus, if you want, say, an Acoustic Piano,
you would have no choice but to use the one Acoustic Piano sound provided for by General MIDI, whereas actual
acoustic pianos differ greatly in sound and timbral character.
In order to satisfy the requirement for different variations in tone quality within a specific sound category, several
methods have been devised to allow one Program Number to represent multiple varieties or
Variations of a basic
sound such as Piano, Vibes, Trumpet, etc. The most common of these is the “GS” ( G eneral S tandard or G eneral
S ound) extension of the General MIDI specification.
The GS standard is fully compatible with General MIDI; however, instead of only 128 sounds, it provides the means
to have up to 16,384 different sounds. This is accomplished by providing up to 128 banks of voices for each of the
128 Program Numbers in General MIDI (128 × 128 = 16,384). It should be noted that this is a theoretical limit - the
actual number is typically much less (anywhere from 300 ~ 900 sounds and/or drum samples).
GS uses a method called Bank Switching to select the different sound banks. It does this by sending two additional
Controller Numbers ahead of the Program Number so that the instrument will know which sound to play. Controller
#32 (Bank Select LSB -
L east Signicifant B it) is used to select a particular bank scheme or “family,” while
Controller #0 (Bank Select MSB - M ost S ignificant B it) is used to set a particular voice variation within that bank.
SPECIAL NOTE: The number of available voices will depend on the particular MIDI instrument you are
using. Please consult the documentation provided with the MIDI instrument you are using to find which
additional voices are available. This information will usually be found in either the Owner’s Manual or an
additional Reference Guide.
The next few paragraphs will show you how to use this feature on your SKX .
External Zone Bank Select MSB
This Advanced Feature allows you to set the value for Controller #0 - M ost S ignificant B it.
Turn the VALUE Rotary Control to make your selection.
HA<O> SKX
Owner’s Playing Guide